:: L'Evo2UzioN3 DeL Tu0 PC ::
https://hwtweakers.net/forum/
) )
Questa mi piace davvero!!!AutoFSB:
--------------------------------------------------------------------------------
AutoFSB automatically sets the FSB depending on the CPU load. First you must know your min. and
max. FSB, set them with the FSB trackbar and the Max. and Min. buttons. You also should set some
VCore-presets, use the trackbars for this. The VCore is increased/decreased if a saved preset is
reached. Then use min./max. Load to determine when the FSB is decreased or increased and the two
delay options to set how long it should wait before increasing or decreasing. Now you can set a
max. CPU temp. If the CPU temp. is greater than this value, the FSB is not increased anymore. If
you have set the "FSB down on MT" (Max. Temp) checkbox, AutoFSB will decrease your FSB if the CPU
temp. is greater than max. Temp.
For example, max. Load is 80%, min. Load 20%, Delay (max) 30s, Delay (min) 2min and Max. Temp 45 with
"FSB down on MT" checked:
If the CPU load is greater than 80% for 30s it increases the FSB until CPU load is less than 80%
or to max. FSB. It stops increasing the FSB if the CPU temp is 45 degress. If the CPU load is less
than 20% for 2 minutes it decreases the FSB until CPU load is greater than 20% or until
min. FSB is reached. The FSB is also decreased if the CPU temp is greater than 45 degress (if
FSB down on MT is checked).